the arrayx-bob3-16s is an evaluation board allowing easy access to the sum of all of standard pixel signals of a sensl arrayc-30035-16p, 3mm 4x4 sipm array, in addition to all of the individual fast output signals. the summed breakout board has a centrally located hirose 40-way connector df17(2.0)-40ds-0.5v(57). this connector mates with the hirose df17(2.0)-40dp-0.5v(57) board-to-board connector on the arrayc-30035-16p. see figure 7 in the previous section for information on orientating the array on the bob. a schematic of the board is shown in figure 8 below.
fast signals: all of the fast output signals (fn) from the array are routed via the mating connectors to header pins. these pins are formed by two 20-way (10x2 row) 2.54mm pitch headers; j2 and j3. each of the headers also has 2 pins that connect to the common cathode (cm) and 2 pins left unconnected (nc) to allow prototyping for evaluation purposes.
two sma connectors and balun transformers are provided with 4-pin headers to allow any fast signal to be connected directly to the sma or via the transformer using jumper wires.
产品 状况 compliance 简短说明 所用产品 行动
arrayx-bob3-16s-gevk active
c-array 3mm 4x4 sum bob

your request has been submitted for approval.
please allow 2-5 business days for a response.
you will receive an email when your request is approved.
request for this document already exists and is waiting for approval.